Weidmuller

Be it automobile manufacturing, electricity production or water management – hardly any of today’s industries can do without electronics and electrical connectivity. In this internationalised, technologically changing world, the complexity of requirements is rapidly increasing due to the emergence of new markets. New, more varied challenges have to be overcome, and the solutions to them will not be found in high-tech products alone

Showing all 2 results

  • Glow wire test (IEC 60695-2-11)

    Glow wire test (IEC 60695-2-11)

    The glow wire test is used to verify the safety of the terminal blocks in the event of overheating or overloading. The plastic of the terminal block must be flame resistant. For the test, a terminal block is fixed at right angles to the glow wire. With a temperature of 750° C and a force...
    Read moreDone
  • Pin contact or fork contact

    Pin contact or fork contact

    The busbar product portfolio includes fork busbar and pin busbar versions with one to four poles. The cross-section and current of the electrical busbars are 10 mm² with 63 A or 16 mm² with 80 A.
    Read moreDone

Be it automobile manufacturing, electricity production or water management – hardly any of today’s industries can do without electronics and electrical connectivity. In this internationalised, technologically changing world, the complexity of requirements is rapidly increasing due to the emergence of new markets. New, more varied challenges have to be overcome, and the solutions to them will not be found in high-tech products alone