Showing 865–888 of 2357 results
-
electrolytic-aluminum-capacitor for surface montage with lead-free Reflow-Soldering for high requirements thermo-fixation while the soldering for high vibration exposures (30G, 3 planes, rapid temperature change) high CxV-product for rated voltages between 6,3V - 450 V temperature range -55°C ... +150°C delivery in blister tapes on reel on demand with "coat"-isolation Ø 8,7...18,0 mm parameter adjustment depending...
-
EMC cabinet is used to protect sensitive equipment that is inside the cabinet from harmful RF/EMC levels outside, to comply with the requirements for electromagnetic compatibility. EMCPIONEER offers RF shielded enclosures with high shielding performance. These cabinets have been carefully engineered to provide a high level of shielding effectiveness up to 14KHz-40GHz with 100dB. We...
-
EMC/RFI Filter for PV Inverters
- Reduces conducted emissions towards the solar panel
- Reduces the probability of EMI radiation off the solar panel
- Helps to prevent pre-mature panel aging because of HF leakage currents
- Helps to meet international EMC regulations for the entire PV system
- Most compact standard solution in the industry, optionally available without capacitors to ground (B types)
- New: up to 2300 A
-
-
MAJR Products’ EMI Shielded Fan Ventilation Panels (shielded fan vents) are manufactured to meet the commercial market’s requirements for a low-cost, high-quality EMI fan vent panel. These small fan sized shielded waveguides are available in five standard sizes using a 0.250” thick honeycomb material and have an overall thickness with gasket of 0.407”. Standard gasket is a Monel wire embedded in a solid silicone with an optional gasket of a beryllium copper fingerstock. Tin plate (MIL-T-10727), nickel plate (MIL-C-26074A) or a RoHS compliant plating are available upon request.
-
Hisonic manufactures many different configurations of inductors. Whether you need a simple inductor, common mode choke or a more exotic configuration, Hisonic can engineer and manufacture an inductor that meets your needs. Hisonic inductors are used in a large variety of airborne navigation systems, communications systems, and industrial and commercial electronics applications.
-
TE Connectivity / Polamco EN3660 Anti-Decoupling Banding Adapters are Electromagnetic Compatibility (EMC) backshells meeting MIL-DTL-38999 III and MIL-DTL-38999 IV standards. TE Connectivity / Polamco Anti-Decoupling Banding Adapters fit EN2997 and EN3645 connectors. These backshells serve as an ASNI specification replacement. EN3660 backshells range in shell size from 8 to 18 and include right angle and...
-
The tubular-form end-sleeves, with or without plastic collars, prevent the splitting of individual strands of fine-stranded copper conductors and facilitate their insertion into terminals. The dimensions of the end sleeves comply with DIN 46228-4/1 or are based on the DIN standard. For the correct and secure processing of the sleeves, we recommend using the appropriate processing tools. Hand tools or presses are available for this purpose.
-
The tubular-form end-sleeves, with or without plastic collars, prevent the splitting of individual strands of fine-stranded copper conductors and facilitate their insertion into terminals. The dimensions of the end sleeves comply with DIN 46228-4/1 or are based on the DIN standard. For the correct and secure processing of the sleeves, we recommend using the appropriate processing tools. Hand tools or presses are available for this purpose.
-
The tubular-form end-sleeves, with or without plastic collars, prevent the splitting of individual strands of fine-stranded copper conductors and facilitate their insertion into terminals. The dimensions of the end sleeves comply with DIN 46228-4/1 or are based on the DIN standard. For the correct and secure processing of the sleeves, we recommend using the appropriate processing tools. Hand tools or presses are available for this purpose.
-
PRODUCT CHARACTERISTICS STC-MD-TR Outstanding haptics at 45% snap incl. noise reduction Ultra-short strokes starting at 0.4 mm with ultra-tight tolerances of ±0.1 mm Outstanding haptics at 45% snap Metal domes available in many different sizes and with various contact resistances Custom forces ranking from 2.8 N to 8.5 N Fantastic illumination with an average light transmission...
-
ATTEN Environment Protection Leed-Free 0.5mm /0.8mm/1.0mm Soldering Wire For Electronic Soldering .
Composition: Sn-99.3, Cu-0.7, suitable for high-end electronic products;
Flux: 2.2%
-
Electrical Specifications Nominal Frequency 1.000MHz to 125.000MHz Some frequencies within this range may not be available. Frequency Tolerance/Stability (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration) ±100ppm Maximum ±50ppm Maximum Operating Temperature Range -20°C...
-
Description High full-load efficiency reduces stand-by power requirements; most suitable for 15W or less applications. Features 1.Easy to design compact AC/DC due to small number of external components. 2.Compatible to various standards : IEC 60335, UL 60950 , etc. 3.Potential design evaluation time savings; EMC, open/short circuit testing, & etc. 4,Enables significant reduction in power...
-
The Amphenol Industrial ePower series of connectors are designed for the demanding requirements of hybrid, electric vehicles, and utility truck electrical systems. The connectors are ideal for systems operating at 800 VDC to 1000 VDC with a 200 A to 500 A rating. The product incorporates the patented RADSOK® technology for higher amperage, lower T-rise, less resistance and mating force. It offers a 40% smaller footprint than three EMI shielding cable glands and easier operation of termination with shielded cable by a washer compressing the shield to the inside surface of the shell. The connector series covers 2 or 3 power contacts. As an example, one ePower 400 A connector can replace three conventional connectors, saving space and cost.
-
Features: Switched-mode power supply Natural convection cooling when horizontally mounted Encapsulated for use in control cabinets Limited Power Source (LPS) per NEC Class 2 Bounce-free switching signal (DC OK) Suitable for both parallel and series operation Electrically isolated output voltage (SELV) per EN 60950-1/UL 60950-1; PELV per EN 60204 GL approval, also suitable for EMC...
-
Features: Switched-mode power supply Stepped profile for installation in standard distribution boards Removable front panel and screw mounts for alternative installation in distribution boxes or devices Pluggable picoMAX® Connection Technology (tool-free) Suitable for both parallel and series operation Electrically isolated output voltage (SELV) per EN 60335-1 and UL 60950-1; PELV per EN 60204 Details: Input: Phases 1...
-
Features: Switched-mode power supply Natural convection cooling when horizontally mounted Encapsulated for use in control cabinets Suitable for both parallel and series operation Electrically isolated output voltage (SELV) per UL 60950-1; PELV per EN 60204 Details: Input: Phases 1 Nominal input voltage Ui nom 1 x AC 110 … 240 V Input voltage range AC 85 … 264 V; DC 90...
-
FEATURES Molded-in terminals and fully sealed construction. All plastics UL 94V-0 grade fire retardant. Reliable contact and long-term stability. Binary decimal (8 or 10 positions) and hexadecimal (16 positions), real and complementary codes available. Pin-out is compatible with most of current equivalents. Gold plated contact to ensure low contact resistance. RoHS Compliant
-
FEATURES Molded-in terminals and fully sealed construction. All plastics UL 94V-0 grade fire retardant. Reliable contact and long-term stability. Binary decimal (10 positions) and hexadecimal (16 positions), real and complementary codes available. Pin-out is compatible with most of current equivalents. Gold plated contact to ensure low contact resistance. RoHS Compliant
-
-
Package : 01005 / 0201 / 0402 / 0603 / DFN1006-3L / DFN1210 / DFN1308-5L /DFN1610 / DFN1616 / DFN2010 / DFN2510 /DFN2626 / DFN3020 / DFN3810-9L / DFN4120 / MSOP-08 / SOD-323 / SOT-143 / SOT-23 / SOT-235 / SOT-236 / SOT-363 / SOT-523 Working Voltage : 2.5V~70V Minimum Breakdown Voltage : 2.7V~100V AEC-Q101 Qualified
-
Size(Inches)：0201 / 0402 / 0603 Working Voltage： 5 / 18 V / 24V Capacitance： 0.15 pF
-
