1/8″ Round Spacer
Material Grade Polyamide (Nylon) per L-P-410, Composition 6/6 Finish Plain O.D. 02A (1/8") Length (L) 0.050" I.D. 0.088"-0.098"
Showing 1–24 of 28 results
-
-
3/16″ Male Female Standoff
Note Contact RAF for lengths beyond 3.000 inches. Material Grade Corrosion resistant steel (CRES) per ASTM A582/A582M, type 303 (UN S30330) or 303SE (UNS S3323) orXM-1 (UMS S20300), condition A Finish Passivate per AMS2700, Method 1, Class 4 Male Thread A (#2-56) Female Thread A (#2-56) O.D. 3 (3/16") Length (L) 0.188" -
5/32″ Round Swage Standoff
Material Grade CRES 303SE (UNS S30323) or XM-1, Condition A (UNS S20300) per ASTM A582/A582M Finish Passivate, AMS2700, Method 1, Class 4 O.D. 5/32" Length (L) 0.125" -
-
Bump Springs
Bump Springs are used in conjunction with a primary spring to allow a race car to have a relatively soft / compliant initial spring rate to get down to the desired optimum ride height and then pick up the rate of the bump spring to achieve a constant / optimum dynamic ride height. Key Benefits... -
C-Series
Some thermoplastics, like polycarbonates and structural foams, are brittle – especially in thin-wall applications. Designed for straight holes using ultrasonic or thermal processes, our chevron threaded inserts for plastic add considerable strength. They are our most popular brass inserts, offering the most overall length choices.
Our chevron inserts feature two opposing bands of sharp diagonal knurls, providing high tensile pull-out load carrying capability. Little or no stress is applied to the walls of the molded holes. A lead-in pilot diameter assures true perpendicular alignment.
-
Cantilever U Spring
Maudlin Products makes Cantilever U Spring The Cantilever U-Spring is designed to provide low spring load and clamping forces over a wide deflection range. It is available and stocked in four standard sizes in both 301SS and Elgiloy materials. The spring is available for purchase in continuous lengths ranging from 100 ft. up to annual quantities exceeding 100,000 ft.... -
Cantilever V Spring
The V-shaped geometry of the Maudlin Cantilever V-Spring provides a linear load over a wide deflection range and is used in static as well as slow to moderate dynamic applications. The Cantilever V-Spring is available and stocked in six standard sizes in both 301SS and Elgiloy material. Since the Cantilever V-Spring is produced in continuous... -
Cases & Tray
Product Types Aluminum & Stainless-Steel Cases and Trays Closed Containers and Inner Trays Polymer & Aluminum Implant Caddies Radel Lids and Trays Processes Across our facilities, we use specialized manufacturing technologies to ensure our customers receive only the highest quality products and services. Our current processes include: Metal fabrication CNC machining Polymer forming Vertical manufacturing... -
Components for Lighting & Locking Systems
Components for Lighting & Locking Systems Including light reflectors, lighting bases, CNC machining parts, lighting covers, pressed parts, sockets, components for home appliances, fasteners for switch panels, lighting mounts & plugs. Products also including fasteners & fixings such as bolt pins, flat inserts, micro screws, bolts, springs, threaded rods, square nuts, rhombus nuts, rectangle nuts,... -
-
Compression Springs
Compression springs are the most common spring configuration that product manufacturers turn to when enhanced product functionality is desired. Used in automotive, aerospace, general industrial, medical and technology products, this spring type is used to resist applied compression forces or to store energy in the push mode. In more simple terms, compression springs contain the... -
-
Conventional Suspension Springs
Conventional Springs are high-performance, aftermarket suspension springs primarily used in motorsports and motor racing. The OD (outer diameter) size and free length, along with Hyperco’s Dynamic Travel Response™ spring design, allow for optimization of the total vehicle performance on many Circle Track vehicles and applications. Unlike Coil-Over Springs that are available in a multitude of... -
DS SERIES
The DS Series was designed for today's high performance motion control systems. This Series incorporates two helical beams (double start) in each of two separate HELI-CAL Flexures (double flexure), combining greater end-to-end rotational accuracy with radial flexibility in one design. Available only with integral clamp attachments, the DS series provides the high torsional stiffness and... -
Electroformed Metal Bellows
Electroformed metal bellows are flexible, spring-like, precision engineered components custom designed to fit into OEM parts or assemblies. Of the various types of bellows available today, only our patented manufacturing technology employs our premium alloy FlexNickel™. It offers superior performance characterization and makes Servometer® electrodeposited bellows exceptionally unique. Our electroformed bellows are extremely rugged, yet... -
Full Contact Spring
Maudlin makes Full Contact Spring Maudlin’s heavy duty, high load Full Contact Spring provides continues spring contact along the entire circumference of the sealing lips. It is recommended for extreme sealing conditions such as those involving cryogenics, vacuum and/or light gases at low pressure. Standard cross section designs are available and produced in continues lengths... -
-
-
Locker Springs
Hyperco Locker Springs are designed for use in most popular Ford 9-inch based “Detroit Locker” rear differential assemblies. They are used in most popular forms of Circle Track racing. The cone-shaped Locker Spring is designed to run in a load range to allow the “locker-style” differential to operate properly. Key Benefits of Locker Springs High temperature... -
MC Series
Our MC-Series insert is designed to be molded into Plastics, Rubber & Ceramics. The insert is designed with aggressive diamond knurling that provides high resistance to tensile pull and rotational torque loads. It has a closed bottom and a controlled minor diameter which provides for accurate positioning on core pins. The “closed-end” bottom prevents plastic flow into the threads.
-
Medical Components
Components for Medical Devices The medical device and diagnostic industry is constantly becoming complex, and for the demands of its necessary medical equipment to be met, the components to be used in some electronic devices should be highly precise and reliable. Consideration of variations in surfaces, small size requirements, temperature tolerance requirements & anti corrosive... -
Metal Bellows Assemblies
Electroformed metal bellows are flexible, spring-like, precision-engineered components custom-designed to fit into OEM parts or assemblies. Of the various types of bellows available today, only our patented manufacturing technology employs our premium alloy FlexNickel™. It offers superior performance characterization and makes Servometer® electrodeposited bellows exceptionally unique. Our electroformed bellows are extremely rugged, yet lightweight. They... -
SERVO COUPLINGS
Helical Servo couplings are offered in many different attachment styles as well as a vast array of sizes and materials to suite your specific application and/or custom requirements. Maintaining optimum system performance relies on properly matching a shaft coupling based on your specific performance and application requirements and standards. At Helical, we have taken the guesswork...