1210PC Series Power Inductors
Download: PDF
Showing 1–24 of 44 results
-
-
15.5kV Bolt-On Mount Transformer Fuses
Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They are single,... -
15.5kV Clip-Lock Mount Transformer Fuses
Mersen Amp-Trap fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These general purpose current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current.... -
-
3 PHASE TRANSFORMER
3 phase transformers are used throughout industry to change values of three phase voltage and current. Since 3 phase power is the most common way in which power is produced, transmitted, an used, an understanding of how 3 phase transformer connections are made is essential. In this section it will discuss different types of 3... -
38kV Ferrule Mount Transformer Fuses
Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2"... -
BSCH000603031N0S00
Product detail Structure Multilayer L(mm) ± 0.60±0.03 W(mm) ± 0.3±0.03 T(mm) ± 0.3±0.03 Size Code (JIS/EIA) 0603/0201 Inductance(nH) 1 Unit nH Tolerance(±%) 0.3nH Test Frequency(L) 100 MHz,500 mV Q Min 4 Test Frequency(Q) 100 MHz,500 mV SRF(MHz)Min 10000 RDC(Ω)Max 0.11 Rated Current(mA)Max 470 Operating Temperature －５５℃～１２５℃(Including self - temperature rise) Download: PDF -
BSCQ000603030N6B00
Product detail Structure Multilayer L(mm) ± 0.60±0.03 W(mm) ± 0.3±0.03 T(mm) ± 0.3±0.03 Size Code (JIS/EIA) 0603/0201 Inductance(nH) 0.6 Unit nH Tolerance(±%) 0.1nH Test Frequency(L) 500 MHz,500 mV Q Min 14 Test Frequency(Q) 500 MHz,500 mV SRF(MHz)Min 10000 RDC(Ω)Max 0.06 IDC(mA)Max. 900 Operating Temperature －５５℃～１２５℃(Including self - temperature rise) Download: PDF -
BSPQ000603040N6B00
Product detail Structure Film L(mm) ± 0.6±0.03 W(mm) ± 0.3±0.03 T(mm) ± 0.4±0.03 Size Code (JIS/EIA) 0603/0201 Inductance(nH) 0.6 Unit nH Tolerance(±%) 0.1nH Test Frequency(L) 500 MHz,500 mV Q Min 20 Test Frequency(Q) 500 MHz,500 mV SRF(MHz)Min 20000 RDC(Ω)Max 0.04 Rated Current(mA)Max 1100 Operating Temperature －５５℃～１２５℃(Including self - temperature rise) Download: PDF -
Chip Bead & Inductor
Introduction Reactor is widely used for large power saving effect and stable circuit protection by connecting it to the front end of electric equipment for inverters. Especially, it is widely used in high-power devices such as inverter air conditioners, washing machines, welding machines, and automobiles. Features Compact size and light weight. Low cost and excellent characteristics.... -
Common Mode Chokes
Features:
- Support for all Switching Frequencies
- Up to 50 Amps Current
- All Industry-Standard Shapes Supported (EP, EE, UI, UU, Toroid) to Fill the Common Mode Filter Line Filter Needs
- SMD common mode choke and through hole common mode chokes
-
Custom Bobbin Wound Inductor
Butler Winding designs and manufactures Bobbin Wound Inductors for a variety of power supply and power conversion applications. A Bobbin Wound Inductor is a inductor that is designed with the coil wound on a coil form or bobbin. The core structure is then mounted to the bobbin. Bobbin wound Inductors can be designed to operate... -
FCH160808SF-1R0M
Part Number FCH160808SF-1R0M☐☐ Dimension mm 160808 Inductance Range(uH) 1.00±20% Rated Current (mA) 1700 L(mm) 1.60±0.15 W(mm) 0.80±0.15 T(mm) 0.95 max. DCR (Ω) max. 0.08 Operating Temperature -55~+105℃(Including self-temperature rise) -
FCI1005F-1R0K
Part Number FCI1005F-1R0K☐☐ Dimension mm 1005 Inductance Range(uH) 1.00±10% Rated Current (mA) 15 L(mm) 1.00±0.10 W(mm) 0.50±0.10 T(mm) 0.50±0.10 DCR (mΩ) max. 900 SRF (MHz) 40 Q Value 20 Operating Temperature -55~+105℃(Including self-temperature rise) -
Flat Coil Inductor Manufacturing & Design
Our high quality flat coil inductors come in a shielded, surface mount (SMT) construction type. Rectangular cross-section wire wound into a helical coil gives our flat coil technology high current capacity in a low profile. The core material is typically powdered iron with the associated soft-saturation and low-noise benefits. Use the table below to search... -
Flat Coil Inductor Manufacturing & Design
Our high quality flat coil inductors come in a shielded, surface mount (SMT) construction type. Rectangular cross-section wire wound into a helical coil gives our flat coil technology high current capacity in a low profile. The core material is typically powdered iron with the associated soft-saturation and low-noise benefits. Use the table below to search... -
High Current Power Inductor
Erocore is a high current inductor manufacturer. All molding inductor and metal alloy inductor are produced under strict standards of quality control. High Current Inductor is one of our main products. High Current Power Inductor’s inductance range from 0.1µH 100µH. We have many professional instruments to achieve continuous improvement of products through statistical analysis. We have ideal factory environment control and management, and have professional human resources and work discipline. We also provide very low DCR high current power inductor, molding inductor or metal alloy inductor in high current.
-
High Current SMD Inductor
Introduction Various sizes (3mm~20mm), high current and low DCR implementation products through flat wire application. Features High Current, Low DCR, Molded Power, High Frequency, Low Profile can be implemented in various sizes and capacities. Applications DC-DC Converter, ISG, electric vehicle, communication equipment, etc. -
Inductors, Coupled Inductors, Common Mode Chokes
Hisonic manufactures many different configurations of inductors. Whether you need a simple inductor, common mode choke or a more exotic configuration, Hisonic can engineer and manufacture an inductor that meets your needs. Hisonic inductors are used in a large variety of airborne navigation systems, communications systems, and industrial and commercial electronics applications.
-
Inductors/Chokes
Features:
- Includes Input, Output, Buck, Boost, EMI
- Up to 1 Megahertz Frequency for Power Input, Output, Buck, Boost, Inductors
- Up to 20 Megahertz Frequency for EMI Chokes
- Up to 200 Amps Current.
- All Shapes Supported (EP, EFD, RM, PQ, ETD, ER, EE, EI, UI, UU, Planar, Toroid, Axial and Radial Lead)
-
Molded Powder Inductor Manufacturing & Design
Our high quality, shielded molded powder inductors come in a bar formation, surface mount (SMT) construction type with windings featuring terminations at each end. Since our molded inductors offer mid-inductance (0.2 to 20 uH), wide current (5-55A) and high saturation, they are often ideal for computing and various other applications. You can filter through and... -
Molded Powder Inductor Manufacturing & Design
Our high quality, shielded molded powder inductors come in a bar formation, surface mount (SMT) construction type with windings featuring terminations at each end. Since our molded inductors offer mid-inductance (0.2 to 20 uH), wide current (5-55A) and high saturation, they are often ideal for computing and various other applications. You can filter through and... -
PFC Power Factor Correction Inductors
Features:
- Compact Design for Applications with Airflow
- Rated power: 200W – 2000W
- Operate with controllers from several IC manufacturers
- Designed for universal input voltage range 85VAC – 265VAC
- Shielded toroidal design minimizes radiated EMI.
- Operating temperature range: -20°C to 130°C
- Can be used for single phase and multi-phase interleaved CCM PFC topology
-
Pin type inductor
Type NSL series Size φ9.0×H9.5~φ14.0×H17.5 Features Superior self-standing stability when mounted on the board and possible automated mounting due to its closed magnetic circuit construction and its being a case-mounted type Inductance 10μH~3300μH Rated current 200mA~5600mA Use Consumer electronics, office automation machines, audiovisual equipment, mains electricity, general purpose slimline switched-mode power supply, Industrial equipment, automotive-related...