-
A tubular ceramic resistor has two terminals, and is wound with a resistance element consisting of a wave-shaped alloy ribbon. A high temperature, non-flammable resin insulation is applied after cooling and drying through a high temperature process and then the component mounts are attached. This product supports the use of numerous taps, has is low...
-
An aluminum housed resistor consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure. Following high-temperature anodizing, the enclosure is filled with a special non-flammable cement paste and after hardening; insulation is applied through a high-temperature process. Since the resistor is embedded in the heat-proof cement, it is not affected by external...
-
A C-shaped ceramic resister is wound with copper or chromium-alloy wire as a resistance element. Except for the slide contact surface, the entire component is coated with a high-temperature, non-flammable resin. After cooling and drying, insulation is applied through a high-temperature process. Then, a centered rotating adjuster component is installed, which slides along the resistance...
