Showing 25–48 of 51 results
-
300mA LDO VOLTAGE REGULATOR (Adjustable & Fixed) The LM1117GSF is a low power positive-voltage regulator. This device is an excellent choice for use in battery-powered applications, as active terminators for the SCSI bus, and portable computers. The LM1117 features very low quiescent current and very low dropout voltage of 1V at a full load and...
-
The digital LMI differential pressure sensors with I²C bus and 3 V supply are based on thermal micro-flow measurement within the silicon sensor chip and offer measuring ranges from 25 Pa (0.1 inH2O) Full Scale. Due to their excellent sensitivity, accuracy, offset long term stability and long service life, LMI sensors are ideal for differential pressure gas...
-
Features: Compact size and high-output torque. Superior running quietness and stability. Uses: Printers, multifunction machines, copy machines, FAX, etc. Specifications: Item M25SP-3N M25SP-4N Rated Voltage DC 24V Working Voltage DC 21.6~26.4V Rated Current/Phase 227mA(PEAK) 380mA(PEAK) Coil DC Resistance 21Ω/phase±10% 18Ω/phase±10% Step Angle 7.5º/step 15º/step Drive Method Constant Current Excitation Method 2-2 Phase excitation(Bipolar driving) Insulation...
-
Features: Thin, high resolution and high-output torque. Superior running quietness and stability. Uses: Multifunction machines, scanners, etc. Specifications: Item M35SP-11NK Rated Voltage DC 24V Working Voltage DC 21.6~26.4V Rated Current/Phase 360mA(PEAK) Coil DC Resistance 15Ω/phase±10% Step Angle 3.75º/step Drive Method Constant Current Excitation Method 2-2 Phase excitation(Bipolar driving) Insulation Class Class E insulation Holding Torque...
-
Features: High-output torque and high efficiency. Superior running quietness and stability. Uses: Printers, multifunction machines, copy machines, FAX, etc. Specifications: Item M49SP-3K Rated Voltage DC 24V Working Voltage DC 21.6~26.4V Rated Current/Phase 1A(PEAK) Coil DC Resistance 5.8Ω/phase±10% Step Angle 7.5º/step Drive Method Constant Current Excitation Method 2-2 Phase excitation(Bipolar driving) Insulation Class Class E insulation...
-
GaN Amplifier 50 V, 60 W 5.2 – 5.9 GHz
The MAPC-S1504 is a high power GaN on Silicon Carbide HEMT D-mode amplifier suitable for 5.2 – 5.9 GHz frequency operation. The device supports pulsed operation with output power levels of 60 W (47.8 dBm) in an air cavity ceramic package
-
The RF MOSFET Line 200/150W, 500MHz, 50V
Designed for broadband commercial and military applications using push pull circuits at frequencies to 500 MHz. The high power, high gain and broadband performance of these devices makes possible solid state transmitters for FM broadcast or TV channel frequency bands.
-
80C51 80C186 68HC705 68HC711 68020 For Inquiries: Click here
-
The RF Line NPN Silicon Power Transistor, 250 W, 30 MHz, 50 V
Designed primarily for high–voltage applications as a high–power linear amplifiers from 2.0 to 30 MHz. Ideal for marine and basestation equipment.
-
The MS5637 series wing board for XplainedPro provides the necessary hardware to interface the MS5637 digital barometric pressure and temperature sensor to any system that utilizes our Xplained Pro compatible expansion ports configurable for I2C communication.
- Digital Component Sensor Product Type: Xplained Pro
- Digital Component Sensor Type: Pressure
-
-
Small Signal NPN Transistors, 40V to 50V, Fairchild Semiconductor
Bipolar Transistors, Fairchild Semiconductor
Bipolar Junction Transistors (BJT) broad range provides complete solutions for various circuit application needs. Innovative packages are designed for minimal size, highest reliability and maximum thermal performance.
-
The MEAS Pi weather hat provides the necessary hardware to interface the HTU21D digital relative humidity sensor; MS5637 digital barometric pressure sensor; temperature system sensor (TSYS)01 digital temperature sensor; TSD305-1C55 digital thermopile sensor to any system that utilizes Raspberry Pi compatible expansion ports configurable for I2C communication.
- Digital Component Sensor Product Type: Shield for Raspberry Pi
- Digital Component Sensor Type: Humidity, Pressure, Temperature
-
Part No. Size[mm] CIE X,Y Vf[V] lf[mA] Flux[lm] 2θ½[˚] SBHRN2S0E 4.0X1.4X0.6 0.267, 0.238 6.2 120 73.8 120 Download: PDF
-
Part No. Size[mm] CIE X,Y Vf[V] lf[mA] Flux[lm] 2θ½[˚] SBJFQ120E 3.0X3.0X0.65 0.282, 0.245 3.1 400 121 120 Download: PDF
-
-
The W36600 Series uses a screw machined half hard brass outer pin with a beryllium copper contact, available in Gold or pure Tin. The Outer pin has 3 plating options; RoHS compliant Tin, Tin/Lead or Gold. The moulding material is 30%GF PBT rated to UL 94 V-0 and features include a pin incorporating a straight...
-
-
Part No. Size[mm] CIE X,Y Vf[V] lf[mA] Flux[lm] 2θ½[˚] SWJCR2S0E 1.61X1.61X0.33 0.283, 0.256 5.8 175 114 140 Download: PDF
-
-
-
-
The WBI sensors with I²C bus interface offer mass flow measurement for air and gases based on a highly sensitive thermal measuring principle. The WBI series includes unidirectional as well as bidirectional flow ranges. The digital sensors achieve a very high accuracy over the complete measuring range in the positive as well as negative flow...
-
Quectel AF20 is a cost-effective Wi-Fi & BT* module with high performance. The ultra-compact 17.2mm × 15.2 mm × 2.2mm profile makes it a perfect choice for size sensitive applications. The compact and unified form factor can also help customers reduce product sizes and cut costs. Surface-mount technology (SMT) makes AF20 an ideal solution for...
