DS(R)Series
DS(R)Series: ☑ Dip Switch, Dip Switch ☐ SMD/SMT Type, surface adhesion technology ☐ Tiny Type, mini type ☐ Right angle Type, 90 degree type ☐ Piano Type, piano key type ☐IC Type ,IC型 ☐ 1.27 mm, 1.27 mm ☑ 2.54 mm, 2.54 mm Description
Showing 25–48 of 113 results
-
-
DSDP Series Piano Type DIP SW
1. AII materials are UL 94VO grade,high temperature resistance plastic 2. Twin contact design to ensure stable contact. 3. Gold-plated contact to ensure low contact resistance.Tin plated terminals to prevent contamination during soldering. -
DSDT08LSGET
Features: All materials are UL 94VO grade,high temperature resistance plastic Twin contact design to ensure stable contact. Gold-plated contact to ensure low contact resistance.Tin plated terminals to prevent contamination during soldering. Ratings: Contact Rating Switching: 25mA at 24VDC Non-Switching: 100mA at 50VDC Contact Resistance Initial: 50MΩMax Afterlife: 100MΩMax Insulation Resistance:100MΩMin,60sec at 500VDC Dielectric Strength:500VDC for... -
DSHP Series
SWITCH OPERATION AND TAPING Use tweezers or ball point pen for operation Flux cleaning should be done without removing the Tape If the Tape is removed,it adhered less than before when it is placed back on,possibly causing flux inflow. Sealed switches withstand aqueous,detergent and isopropyl alcohol washing. FEATURES Hyper-miniature DIP swtich,surfacd mount device base on1... -
DSIC SURFACE MOUNT
Product Name: 2.54mm pitch DIP switches DSIC Surface Mount DIP Switch Product Guide Inventory information: Taiwan KE brand, KINGTEK Product Category: 2,3,4,5,6,7,8,9,10,12 bit 11 types Features: 1.27mm pitch; Standard gold-clad contacts; attaching electrical resistance temperature film; a high-temperature plastic body design. DIP switch product performance: Rated current: Switching current 25mA, 24VDC Not switching current 100mA,... -
-
-
-
General Purpose E
Robust standard switch for industrial applications 5 current ratings, up to 30 A Wide variety of auxiliary actuators available 3 terminal types (optional screw terminals available) 3 contact configurations High-temperature 150 °C (200 °C on request) Long-life coil spring mechanism Download: PDF -
-
GT02 Series Keyswitch
Electrical Characteristics: Rating ：12V DC/AC max.10mA AC/DC max Contact Resistance:200mΩ Max(25mΩ typical)(Initial Value） Insulation Resistance:100MΩ Min Voltage Resistance:AC 100V(50~60Hz)1 Minute Eletrical life:Over 50,000,000 cycles(load) Bounce Time:operation speed at 400mm/set Parameters: Operating force:See detail spec Pre-travel:2.0±0.6mm Total trave:4.0±0.4mm Mechanical life:Over 50,000,000 cycles(No load) Operating temperature range:-40℃~85℃ Ambient humidity:＜85% RH Solder ability:260±5℃ 3s±0.5s Soldering heat resistance:260±5℃ 3s±1s... -
HAPTIC SENSING PIEZO SWITCH
Description Haptic sensing embodied in EverSwitch family of product. The haptic sensing has fast responded and can be controlled for duration and vibration level. Haptic sensing creates an action feedback when there is no seen result of activation. Fits into Touch Metal Piezo Switch, 22x1mm thread, 25mm head and ring illuminated with multi-color RGB LEDs... -
High Power Coaxial Switches
MPG Switch line of High Power RF & Microwave Switches fit applications where electromechanical switches fail to meet the size, cost and speed of project specifications. At microwave frequencies, a high power switch acts as a current-controlled resistor, allowing current to flow in a single direction. When forward biased, the switch relay behaves as a closed circuit, but when the current is reverse biased, the RF switch becomes an open circuit.
-
High Repeatability Coaxial
High Repeatability Switches are designed to stand up to rigorous requirements over an extended lifecycle. Our Reliant line of High Repeatability Switches meets these basic requirements with a dependable and economical switching solution, backed by decades of design and manufacturing innovation.
Reliant High Repeatability Switches can operate at temperatures below 25°C, up to 15,000 feet in altitude, and can also be stored up to 50,000 feet without performance degradation. Control can be instituted by applying ground to close the desired port, via TTL logic (by applying +5vdc to close a port or +0Vdc to open a port) or CANbus (to use with controller boards).
At MPG, we help customers meet specifications where insertion loss repeatability and switch life are critical, with an economically priced High Repeatability Switch that can be purpose-built to the following specifications:
-
HSA-12080 FORM C BI-STABLE LATCHER
ELECTRICAL SPECIFICATIONS Power 25 W (max) Voltage Switching 150 VDC (max) Breakdown 250 VDC (min) Current Switching 1 Amp (max) Carry 5.4 Amp (max) Resistance Initial Contact Resistance 0.1 Ohm (max) Insulation Resistance 1E9 Ohm (min) Capacitance Contact 3.5 pF (typical) Temperature Operating -40 TO + 125 °C Storage -40 TO + 200 °C MAGNETIC SPECIFICATIONS Pull - In Range 20-50 Ampere Turns Test Coil Coil III NARM RS-421-A PHYSICAL/OPERATIONAL SPECIFICATIONS Capsule Volume Excluding Leads... -
-
IT-11 SERIES
IT-1178GS SERIES SMD/SMT Tact Switch, Surface Adhesive Tact Switch, Right Angle Tact Switch, 90 Degree Side Press Tact Switch, Horizontal Tact Switch, Horizontal Tact Switch IT-1100AA SERIES SMD/SMT Tact Switch, Surface Adhesive Tact Switch, Right Angle Tact Switch, 90 Degree Side Press Tact Switch, Horizontal Tact Switch, Horizontal Side Press Tact Switch, Embossing, Positioning Post... -
-
-
-
-
-
-
Limit Switches
Characteristic ＊ With high repeat accuracy a wide range of variations in contact form ＊ Suitable for applications demanding high mechanical strength ＊ Compact new design for terminal utility structure enables the terminal section to be fully opened for easy wiring ＊ Compact limit switch with thin and highly sealed design, multiple mounting possible with...