Details
1） Appearance and Dimensions.
2） Features
| • | Insulated membrane packaged,with fast thermal induction and high sensitivity. |
| • | Good stability and high reliability. |
| • | Good insulating property. |
| • | High resistance precision. |
| • | Safe in use. |
| • | Small in volume,light in weight and firm in structure, applicable to automatic installation. |
（3） Purpose
| • | Temperature measurement. |
| • | Temperature control. |
| • | Temperature compensation. |
（4） Application
Computer, printer and electric family appliances.
（5） Precautions
| • | Do not bend the resistance coil holder lest the resistance deviates due to the shake-off of chips and coil holder. |
| • | keep the temperature under 300℃ at soldering and not more than 0.5 seconds for soldering. |
| • | Use hot air gun for heat shrinking tubing and keep the air gun at about 120℃ in temperature. |
| • | When soldering, use constant temperature iron, with one hand holding the resistor, the other holding electric wires for butt-welding to improve the productivity and shorten the soldering time. |
| • | Special notice: never touch the chip (the top of resistor) with hand. |
6） Description of Product Types and Specifications
| 1. | KPD —— Abbreviations for KePengDa. |
| 2. | MF —— Indicates negative temperature coefficient thermistor. |
| 3. | 5K —— Temperature measurement membrane thermistor. |
| 4. | 103 —— Nominal resistance of thermistor, e.g. 103 indicates that the nominal resistance of the thermistor is 10*103 （Ω）. |
| 5. | F —— Resistance error (precision) of thermistor, e.g. F indicates the thermistors resistance value error (precision) is ± 1%. |
| 6. | 338 —— B25/50 value of thermistor, e.g. 338 indicates the material factor B25/50 value of the resistance is 338*10K. |
| 7. | F —— B25/50 error (precision) of thermistor, e.g. F indicates B25/50 error (precision) is ±1%. |
| 8. | 25 —— pin length, e.g. 25 indicates the type of pin length is 25mm. |
