Showing 889–912 of 2357 results
-
The ESKA 120800H Fuse clip is ideal for 5 x 20mm Fuses with a power rating of 6.3A. The fuse clip has been designed for Printed Circuit Boards (PCB). Please note, that two of these fuse clips are required to hold one fuse. Nominal current: 6.3A Nominal voltage: 250V AC RoHS compliant: yes Specification: 120800...
-
This is part of a range of 5 x 20mm slow blow glass fuses from ESKA. Length: 20mm Diameter: 5mm Nominal current: 2A Nominal voltage: 250V Standards/test marks: DIN 41.660, EN 60127-2-1 Supplied in packs of 10 Manufacturer's part 522.520
-
These quick-acting micro fuses from ESKA are suitable for use in all applications for cylindrical fine wire fuses requiring mandatory UL approval. Length: 20mm Diameter: 5mm Glass tube Nominal current: 3A Nominal voltage: 250V Standards/test marks: UL No. 248-14 Supplied in packs of 10 Manufacturer's part UL520.663 Download: PDF
-
Features: Protects through sparking over the porous layer when surge exceeds the spark-over voltage Patented construction with reduced costs High insulation resistance, low capacitance, and fast response time RoHS and REACH compliant General Specifications Download: PDF
-
32-bit RISC-V MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
-
32-bit RISC-V MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
-
32-bit MCU & 2.4 GHz Wi-Fi
-
Small size, high performance and low cost Very low DCR and high-energy storageIdeal for DC-DC converters, LCD monitors,step-up or step-down converters, flash memory programmers,etc
-
6.0 x 4.82 x 3.0 mm (H) + 18.0 mm
-
Primary (TX) transmitter assembly. Major materials: coil, shield and magnet. Integrated in the plate for transmitting power. 6.3uH(Typ)@100KHz/1Vrms. Meet to WPC standard of A5.
-
New energy vehicle refers to the vehicle with advanced technical principles, new technology and new structure, which uses unconventional vehicle fuel as the power source (or uses conventional vehicle fuel and new on-board power unit) and integrates the advanced technologies in vehicle power control and drive.
New energy vehicles include pure electric vehicles, incremental electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, other new energy vehicles, etc.
-
New energy vehicle refers to the vehicle with advanced technical principles, new technology and new structure, which uses unconventional vehicle fuel as the power source (or uses conventional vehicle fuel and new on-board power unit) and integrates the advanced technologies in vehicle power control and drive.
New energy vehicles include pure electric vehicles, incremental electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, other new energy vehicles, etc.
-
New energy vehicle refers to the vehicle with advanced technical principles, new technology and new structure, which uses unconventional vehicle fuel as the power source (or uses conventional vehicle fuel and new on-board power unit) and integrates the advanced technologies in vehicle power control and drive.
New energy vehicles include pure electric vehicles, incremental electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, other new energy vehicles, etc.
-
The EVAL01-Fenix-RML is a UHF RFID battery assisted temperature sensor tag with data logger. The device features a TMP112 temperature sensor from Texas Instruments with a temperature range from -40°C to +85°C. The sensor tag provides an accuracy of ±0.5°C in temperature. It can store up to 44,000 temperature samples. The tag is compatible with EPC C1G2 RFID...
-
The EVAL01-Stella-R is a UHF RFID battery-free LED tag. The device features an ASMT-SGB5-NW703 LED from Avago Technologies with a viewing angle of 120 degrees. The tag is compatible with EPC C1G2 RFID commercial readers. No custom hardware or custom commands are required. The EVAL01-Stella-R is ideal for visual aid in identification processes. The battery-free LED device...
-
The EVAL01-Titan-R is a UHF RFID battery-free relay tag. The device features an EC2-C3SNU bistatic relay from Kemet with a switching power of 60W. The switching voltages are 250 V for AC and 220 V for DC and the switching current is 2 A. The tag is compatible with EPC C1G2 RFID commercial readers. No custom hardware...
-
The EVAL01-X5-R is a UHF RFID battery-free contact detection tag. The device features a switch monitor that allows for determining the status of an associated circuit.
-
The EVAL02-Stella-R is a UHF RFID battery-free LED tag with polycarbonate casing. The tag is compatible with EPC C1G2 RFID commercial readers. No custom hardware or custom commands are required. The EVAL02-Stella-R is ideal for visual aid in identification processes. The battery-free LED device provides a unique identification number with which the reader can order...
-
Micropol manufactures and delivers a wide range of products and several accessories within telecom and broadcast. The cable usually used for our event reels is based on a long development together with the armed forces. The event fiber reel is adapted for tough environments, which makes it excellent for sporting events, concerts and live broadcasts....
-
1, large capacity, high specific power The products are high quality raw materials, which have the characteristics of high current discharge performance and high capacity. 2, low temperature capacity The product has a good low temperature charge and discharge, avoiding battery life in winter. 3, maintenance-free characteristics The battery is a valve-controlled sealing structure, which...
-
Widely used in
Electric vehicle, Sightseeing car, Golf cart, Garbage truck, Patrol car.
-
Benefits Include:
- Configurable for lead-acid and AGM batteries
- Battery de-sulfation and Lithium curves available
- Multi-ampere hour capable
- Quality-built for little to no maintenance and years of dependable service
- All case styles can be wall or floor mounted
- 3-year full warranty
- UL and cUL listed and meets BCI requirements
-
An extension spring is a part that captures energy and develops force used to execute an action. The “initial tension” is created during manufacturing when the wire is rotated backwards during coiling. When you pull the spring apart, you are undoing the rotation, which develops force or initial tension. Extension springs are used in a...
-
Part No Emitting Color Chip Vf (V) @140mA lv(cd) @140mA Viewing angle 2Θ½ Material λD (nm) (Typ) Min Max Min Typ AM-LG-3433UYR-HC-T140 Amber AlGaInP 590 1.6 3 ------- 7.1 120
